Low level developer

Описание

 Over 14-year experience in designing products for consumer market, railways and electric
power stations in accordance with environmental and EMC standards (FCC, IEC). It included
(1) electronics circuit design, analysis and modeling; (2) multilayer PCB design in
accordance with IPC-SM-782A/IPC-A-610 standards; (3) prototyping and troubleshooting
circuits with digital multimeters, scopes and signal generators; (4) EMC (IEC 61000-4-2/4/5)
tests performing modifications of circuit and PCB to meet the EMC standards
 dual sensor cameras design with MIPI CSI2, Ethernet, PoE interfaces
 Over 14-year experience in designing real-time embedded software in C/C++ for 8-/16-/32-
bit MCUs (ARM, F2MC-16LX, AVR – Qualcomm, ST, NXP, Fujitsu, Atmel) including
high-level architecture design, solid coding, debugging and writing documentation in
compliance with company standards
 Over 14-year experience in using RTOS (uCOS-II, scmRTOS) including coding and
debugging low-level drivers for both integrated and external peripherals via serial interfaces
(1-wire, I2C, SPI), inter-controller communications via RS-232, RS-485 interfaces
 Over 14-year experience in using version control systems
 Over 14-year experience in designing test equipment including developing test sequences,
methods and procedures, writing documentation and training technicians
 Over 14-year experience in in-field and in-lab experiment running and data processing in
Matlab, Excel and Mathcad including digital filtering, math statistics and analysis to meet
system requirements (accuracy, performance)

 C, GCC, IAR, Softune
 uCOS-II, scmRTOS
 Altium Designer, Kicad, Orcad
 Simetrix (SPICE simulator)

 GIT, SVN, Mercurial, CVS
 Matlab, Simulink, Scilab, MathCad
 LabWindows CVI
 GanttProject, ProjectLibre

 Expert in Windows and MS Office
 Can read technical documentation and email with support services of components and
software tools manufacturers, and have verbal communication skills in English
 Have good communication skills in general and with in-house and ODM/OEM staff: PC
programmers, mechanical engineers, technicians, etc.
 Willingness to travel. Already did that to Singapore, Nevada, Florida, and other places
 Have a valid H1-B visa

2010 Lightning Protection Devices application, PHOENIX CONTACT, Blomberg, Germany
2006 NAVAL UNIVERSITY Saint Petersburg Russia
Course Certificate in EMC
1996-2001 URALS STATE TECHNICAL UNIVERSITY Yekaterinburg Russia
BS in Radio-Electronics Engineering

2014 - PRESENT – IC 360, Yekaterinburg, Russia, subsidiary of IC Realtime, USA,
www.icrealtime.com, LEAD ELECTRONICS ENGINEER
Main responsibilities
designing and manufacturing innovative cameras for consumer and surveillance markets:
ALLIE CAMERA
2012-2014 – ElecomService, Yekaterinburg Russia, HEAD OF ENGINEERING
Main responsibilities
designing and manufacturing equipment for electric power stations and substations: measuring relays
and monitoring devices for backup batteries, insulation monitoring devices and insulation fault
detection systems

2000-2012 - INFOTECS AT, Yekaterinburg, Russia, SENIOR ELECTRONICS ENGINEER
Main responsibilities
designing and manufacturing equipment for railways in Russia and the CIS region

Achievements
While working for INFOTECS AT, designed and implemented
Test and Calibration Equipment
 developed methods of testing including test sequences and set of allowable parameter values
 designed electrical and assembly drawings based on DAQ boards by ICP DAS
 chose programmable power supply, ADC board, relay board and voltage calibrator
 trained technicians to use the equipment

Signal Point Monitoring Controllers (KDST)
 successfully modeled algorithm in Matlab Simulink
 upon results designed schematics for 4 controllers (all with MCU)
 designed 4 four-layer PCBs
 developed and implemented a protocol for inter-controller communication as well as for
communication with PC and remote concentrator based on RS-485 interface
 designed firmware using RTOS and digital filtering
 participated in EMC tests (IEC 61000-4-2/4/5) and carried out EMC tests on my own. The
controllers have measuring device approval No.28989 (RU.C.34.005.A).

Wheel Impact Load Detector
 researched the subject and ran a field experiment with DAQ board and MEMS
accelerometers
 set requirements for acquisition PC software
 processed the collected data in Matlab
 designed electrical schematics for rail-mounted sensors and for data processing board based
on 16-bit MCU from Fujitsu
 designed 2 PCBs
 developed firmware with strict real-time performance
 made a statistical analysis of performance of installations on railways in MS Excel with
macros

Communication Controller for RFID Reader
 designed schematics and PCB (wheel passing sensor conditioning board and communication
board) and firmware in C with uCOS-II

Software for Hot-Bearing Scanner
 developed cyclic algorithm of scanner (data capture by ADC, gain control, data collection
and transmission to remote controller) and implemented firmware with strict timing
 implemented the digital thermometer reading (1-wire protocol), stepper motor control and
positioning with magnetic sensors

Emulator of Hot-Bearing Scanner (diploma project)