Lead Commissioning Controls Engineer

Описание

CURRICULLUM VITAE


Surname: Goryunov
Name: Igor
Date of birth: 24.08.1975
Marital Status: Married
Address: Azerbaijan, Baku. Mir Gasimov 52 str . apt 43
Home phone : (+99412) 4495913 Mobile : (+99450) 3827307 ; +79145700622
E-mail: igoryunov@hotmail.com.
Skype : miswaco7

EDUCATION:
April 16th 2012 : DH oil free compressors course in CompAir company. In Germany
April 17th 2012: L and LRF series rotary screw compressors course in CompAir company. In Germany
Dec 20th 2010: Oil Spill Response training course in Briggs company.
Dec 15th 2010 : Fire Fighting course.
Dec 11th 2010: First Aid training course.
Dec 10th 2010: Permit to Work training course in OTI company.
Dec 5th 2010: Medical Check Up.
July 17th 2009: CD600 fully hydraulic course for centrifuge. In Italy.
August 21st 2009: Basic Offshore Safety Induction and Emergency Training in Baku.
2nd June 2006: CRI (Cutting Re-injection) Operation and Maintenance in Aberdeen Scotland.
12th August 2005: IFE Centrifuge workshop.
17th June 2004: MI-SWACO Injection systems.
15th June 2004: MI-SWACO Cuttings and Waste collection
28th April 2004: IFE SWACO Basic Equipment.
30th April 2004: IFE Centrifugal pumps.
15th September 2003: IFE Basic Concepts.
October 2003: Duster Dryer system course in Houston. USA.
May-June 2000: SDP Induction course in Pau Training center. PMS/CAM course in Pau.
June 2000: HSE Services: Fire Fighting, H2S, permit to Work, Sea Survival, First Aid.
July 2000: English school in American Technical school.
Sept-Nov 1997: School of English < Language> in Moscow.
1992-1997: "Azerbaijan State Oil Academy". Department "Offshore oil and gas construction" Qualification: engineer-mechanic
1982-1992: Secondary school #174.


EXPERIENCE:
Aug 2020 - Aug 2021 Maire Tecnimont SPA.
Position: Commissioning Mechanical Supervisor . Project AGPP( Amur Gas Process Plant ) Svobodny, Russia. Gazprom Project.

Responsibilities: Carry out all activities such as flushing/blowing, reinstatement, leak test, motor run-in, machinery run-in, static equipment inspections, cleaning, internals installations, working with rotating equipment ( compressors , dosing pumps ( chemical injection packages), centrifugal pumps ( horizontal, vertical ) , alignment and etc.) , compressors, air coolers, blowers, HVAC, experience with PID drawings, GA( general arraignment ) drawings , Vendor drawings , and etc.
To implement the pre-commissioning and commissioning procedures for rotary equipment;
Execute with the assigned crew from the Sub Contractor all the activities pertaining to the discipline;
Ensure effective utilization of commissioning manpower and consumables;
Ensure the execution of Vendor's specialists' field activities with the assigned resources from the Sub Contractor as per Vendor's representative plan;
Carry out the equipment inspection with Client representative as per the procedures and ensure proper certification is produced;
Prepare the forms for all the tests to be performed and ensure submission of the certificates, duly signed by involved parties for final hand over to the certification engineer (QA/QC);
Coordinate in field with the vendor representatives;
Keep record of all the activities carried out;
Ensuring the safety practices are strictly followed during the execution of activities;
Reporting the progress and constraints to the Mechanical Supervisor;
Can be the authorized person designated by the site manager to receive or issue a Permit to Work according to the project Permit to Work Procedure.
Assistance to supervisor for:
Expediting of pending Punch List Items in accordance with Commissioning Manager (CMM)
Coordination and supervision of Construction support activities during the performance of the pre-commissioning, commissioning activities.





Nov 2019- Aug 2020 Gazelli Group LLC
Position: Mechanical Engineer
Responsibilities:
a) To organize the proper and safe operation of all equipment in the area of ​​responsibility,

b) Organizes the operation of steam and hot water boilers in accordance with safety rules and regulations established by the Ministry of Emergency Situations, ensures the certification of boilers.

c) Ensuring that boiler house operators are tested once a year on their knowledge and skills in the safe operation of boilers;

d) Participates in the preparation of job descriptions for boiler, ventilation, water supply operators, electricity,

e) Provides rational proposals for the reconstruction of power equipment, power lines, heating networks, pipelines, air ducts, modernization of power systems,

f) Participate in the design of steam and hot water, ventilation systems, power supply lines and supervise the installation of equipment in accordance with the project,

g) to ensure the availability of technical passports for steam and hot water boilers, compressors, ventilation systems and other equipment related to the subordinate area, a list of equipment catalogs and appropriate spare parts, preparation and archiving of technical catalogs,

h) Compile defect tables, make a list of required parts and compile the minimum amount of spare parts,

i) Supervise the proper operation and testing of all equipment, machinery and devices in accordance with the instructions and organize the implementation by preparing maintenance plans;

j) To draw and prepare drawings of outdated mechanical parts, to ensure their processing,

k) To check the level of theoretical and practical knowledge of the employee to be hired for the field of maintenance, to provide on-the-job training to increase the knowledge and experience of employees,

l) Receipt of orders for repair works of Gazelli Group LLC's divisions and control their execution.

m) Purified water supply for production, drinking water supply, electricity supply, ventilation system (heating, cooling, sourma), fire extinguishing system, cosmetology equipment, etc. to monitor the implementation of repair work.

n) To register the indicators of water and gas meters belonging to Gazelli Group LLC and to control the technical condition of the meters.

o) Supervise the implementation of the technical inspection process and registration of units.

p) Perspectives of technical development of departments and organizations; working principle, technical and design features of developed and used technical means; materials and their properties; research methods, rules and conditions of work performance; requirements for technical documents, materials and information; current standards, technical conditions, regulations and instructions for the preparation and execution of technical documents.

d) Methods of determining the economic efficiency of research and development, conducting technical reports; achievements of science and technology, advanced experience, basics of organization of economy, production, labor and management; basics of labor legislation, rules and norms of labor protection, safety, industrial sanitation and fire protection.

r) To control the operation of steam and hot water boilers, compressors and other equipment by operators in accordance with regulations and safety rules,

c) Supervise the repair and construction work carried out in the production areas, regularly report to the Chief Engineer and Management on the progress of the repair work,

t) Ensuring the registration, archiving, protection, secrecy and sending of documents to the Central Archive,

u) Participate in making decisions and measures in the field of Occupational Safety and Health, Sanitary-Epidemiological and Environmental, Fire Protection, and inspect applications.
Also Supervised for construction team, which build new factory for Gazelli Group. In charge of heating or cooling systems, refrigeration, piping, and plumbing. Responsible for ongoing maintenance of the system they install. A takes on a supervisor's role in a construction project.


May 2019 - Sep 2019 Maire Tecnimont SPA.
Position: Commissioning Mechanical Supervisor . Project CORU ( Combine Oil Refinery Unit ) " Euro+". Gazprom Project Moscow Russia
Responsibilities: Carry out all activities such as flushing/blowing, reinstatement, leak test, motor run-in, machinery run-in, static equipment inspections, cleaning, internals installations, working with rotating equipment ( compressors , dosing pumps ( chemical injection packages), centrifugal pumps ( horizontal, vertical ) , alignment and etc.) , compressors, air coolers, blowers, HVAC, experience with PID drawings, GA( general arraignment ) drawings , Vendor drawings , and etc.
To implement the pre-commissioning and commissioning procedures for rotary equipment;
Execute with the assigned crew from the Sub Contractor all the activities pertaining to the discipline;
Ensure effective utilization of commissioning manpower and consumables;
Ensure the execution of Vendor's specialists' field activities with the assigned resources from the Sub Contractor as per Vendor's representative plan;
Carry out the equipment inspection with Client representative as per the procedures and ensure proper certification is produced;
Prepare the forms for all the tests to be performed and ensure submission of the certificates, duly signed by involved parties for final hand over to the certification engineer (QA/QC);
Coordinate in field with the vendor representatives;
Keep record of all the activities carried out;
Ensuring the safety practices are strictly followed during the execution of activities;
Reporting the progress and constraints to the Mechanical Supervisor;
Can be the authorized person designated by the site manager to receive or issue a Permit to Work according to the project Permit to Work Procedure.
Assistance to supervisor for:
Expediting of pending Punch List Items in accordance with Commissioning Manager (CMM)
Coordination and supervision of Construction support activities during the performance of the pre-commissioning, commissioning activities.

May 2018 - April 2019: Maire Tecnimont SPA.
Position: Commissioning Mechanical Supervisor . Project. Al Dabbiya Surface Facilities Phase III U.A.E. Abu Dhabi. ADCO.

Responsibilities: Carry out all activities such as flushing/blowing, reinstatement, leak test, motor run-in, machinery run-in, static equipment inspections, cleaning, internals installations, working with rotating equipment ( compressors , dosing pumps ( chemical injection packages), centrifugal pumps ( horizontal, vertical ) , alignment and etc.) , experience with PID drawings, GA( general arraignment ) drawings , Vendor drawings , and etc.
To implement the pre-commissioning and commissioning procedures for rotary equipment;
Execute with the assigned crew from the Sub Contractor all the activities pertaining to the discipline;
Ensure effective utilization of commissioning manpower and consumables;
Ensure the execution of Vendor's specialists' field activities with the assigned resources from the Sub Contractor as per Vendor's representative plan;
Carry out the equipment inspection with Client representative as per the procedures and ensure proper certification is produced;
Prepare the forms for all the tests to be performed and ensure submission of the certificates, duly signed by involved parties for final hand over to the certification engineer (QA/QC);
Coordinate in field with the vendor representatives;
Keep record of all the activities carried out;
Ensuring the safety practices are strictly followed during the execution of activities;
Reporting the progress and constraints to the Mechanical Supervisor;
Can be the authorized person designated by the site manager to receive or issue a Permit to Work according to the project Permit to Work Procedure.
Assistance to supervisor for:
Expediting of pending Punch List Items in accordance with Commissioning Manager (CMM)
Coordination and supervision of Construction support activities during the performance of the pre-commissioning, commissioning activities.



Oct 2017 - Jan 2018 : Halliburton PSL
Position: PPS ( Piping Process Services ) Supervisor at Sangachal Terminal. Shah Deniz 2 project.
Responsible: Oil flushing, hot oil flushing, bolting, hydro test, leak test.

Dec 2015- Okt 2017 : BP- Azfen J.V.
Position: Commissioning Mechanical Engineer. SD -2 ( Shah Daniz ) project. SD-2 platform at ATA ( Amec Tekfen Azfen) yard and Sangachal Terminal.
Responsible: Produce project specific procedures, Preservation & Maintenance check sheets, matrix and schedules.
Find out technical problems associated with rotating/static equipment and mechanical packages/valves are identified and resolved or coordinated with the respective vendor.
Preserve and maintain rotating equipment after equipment commissioning and start-up.
Preparation of RFQ's and evaluation of vendor technical bids and preparation of technical bid analysis for all specialist services activities.
Assessing the requirements of special tools/temporary facilities/equipment required for pre commissioning and commissioning.
Reading PI&D, Plot plan, GA (vendor drawings), isometric and etc. drawings.
Participate in model reviews of the plant with respect to Accessibility & Maintainability requirements.
Perform & guide various activities related to rotating equipment likes lube oil flushing, alignment, lubrication, vibration checks, start-up etc.
Perform & guide various activities related to static equipment likes proper installation of internal inside the vessels as per drawing & specifications.
Perform & guide in air blowing, flushing, leak testing, drying & inerting of various piping.
Perform & guide in various activities such as mechanical interlock, pipeline pigging activities, spring support, hot & cold setting.


May 2015 - Nov 2015 : AZTEXNIKA LLC
Position: SKF Technical Support Specialist.
Responsible : Manages technical relationships with key customers, including responding to technical enquiries by using SKF advance calculation tools and/or in relation with other departments in SKF. Handles technical complaints and managing technical risks. Responsible of internal projects. Develop the life cycle management process including seals and service competences.

- To identify and analyse technical details of customer's requirements and to communicate these clearly and accurate to both the customer and the SKF organization;
- To support application reviews on machines and equipment;
- To work closely with the sales organization, contribute to opportunity generation and support the development of value added solutions;
- To understand, use, interpret and verify results from engineering software to create value for customers;
- To be responsible for customer relationship management at the engineering level;
- To participate in the execution of Root Cause Analysis of the customers' application;
- To support internal and external trainings;
- To represent SKF and its products and services at customers and institutions through visits, presentations, seminars and fairs;
- To follow management instructions and procedures; to report Environment Health and Safety (EHS) risks and EHS related incidents; to follow quality specifications and requirements, and identify quality risks and opportunities for improvement.


April 2015 - May 2015 : Baku Shipyard Company.
Position : Mechanical Officer.
Responsibilities : Evaluates mechanical and electromechanical systems and products by designing and conducting research programs; applying principles of mechanics, thermodynamics, hydraulics, heat transfer, and materials.
Confirms system and product capabilities by designing feasibility and testing methods; testing properties.
Develops mechanical and electromechanical products by studying customer requirements; researching and testing manufacturing and assembly methods and materials; soliciting observations from operators.
Develops manufacturing processes by designing and modifying equipment for fabricating, building, assembling, and installing components.
Assures system and product quality by designing testing methods; testing finished- product and system capabilities; confirming fabrication, assembly, and installation processes.
Prepares product reports by collecting, analyzing, and summarizing information and trends.
Provides engineering information by answering questions and requests.
Maintains product and company reputation by complying with government regulations.
Keeps equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures; requesting special services.
Maintains system and product data base by writing computer programs and entering data.
Completes projects by training and guiding technicians.
Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies.
Contributes to team effort by accomplishing related results as needed.
:: Knowledge of marine class surveyor rule preferred;
:: Understand and able read engineering drawings on various mechanical equipments, pumps, valves installation drawing;
:: Able to co-ordinate with vendor or supplier in technical matter & commissioning;
:: Effective analysis and problem solving skills.


Oct 2012- June 2014 : Worked in Forbes Engineering & Supplies company.
Position : Technical Sales Manager.
Responsibilities : manages the team of technical professionals supporting sales of the company's products, solutions as well as services. Manages customer situations and designs strategies necessary to maximize customer satisfaction.
Develops technical initiatives geared towards improving the effectiveness of the technical team. Assesses reward and coaches technical sales professionals within the organization. Provide support to front line sales people overseeing presentations, technical support together with customer presentations. Assist customers in the operation of their products and organize support for problems they may have.

Feb2011- Oct 2012: Worked in PDL ( Providence Doytch Limited ) company. Position: mechanical engineer.
Responsibilities : Select the pumps, checked hydraulic datasheets for pumps, GA ( general arrangement) drawings, pumps curves, compressors ( air, gas), turbines, operate and maintain the rotating equipment. Responsible for BP Sangachal projects of Flowserve company pumps , AzMeCo ( Azerbaijan Methanol company) project for centrifugal, gear, screw pumps, steam turbine for centrifugal pumps, compressors, gears and all rotate equipment. Also operate and maintain. Knowledge standards as : API, ASME, ANSI, ISO. Experience in commissioning , installation , start up equipments. Experience of MAXIMO program.

December 2010 - Feb2011: Worked in "AA Services" company at BP Serenja Hazardous Waste Storage Site. Position is HTDU - Service engineer (operator) HTDU- Heating Thermal Desorption Unit
Responsibilities: Operating and maintenance HTDU unit. Operation of the units in accordance with Plant Operating Manual.
- Issue working permits under the Permit to Work System and conduct toolbox talk when on night shift.
- Make sure that no new operation is done without Risk Assessment.
- Organize work at the site/unit is such a way that activities are performed in a safe and efficient manner.
- Ensure that all updated, specific and authorized instructions are always available to the HTDU operating staff.
- Plan and supervise maintenance work.
- In co-operation with the "off-shift" staff and supervisor from Soil Recovery, ensure that requisitions are raised so that the unit is adequately supplied with equipment, spare parts and material.
- Provide introductory and "on-the-job" training for operator's assistants and the crew.
- Safe operation of equipment and technical systems
- Safe and correct implementation of procedures in the conducted maintenance program
- Ensure that relevant requirements of the Management System are implemented on the activities performed under his management
- Initiate corrective action required to prevent the occurrence of a non-conformance
- Immediately inform the Supervisor when any equipment is damaged/found to be damaged
- Notify the Management team in any situation where it becomes necessary to deviate from standard operating criteria

Specific Responsibilities:
- To be responsible for thermal generators' maintenance and to determine schedule and procedure for safe and efficient maintenance
- Maintain contact with supplier to ensure timely and efficient maintenance and urgent repair of generators
- Prepare and updаtеrequired documentation for generators' maintenance as per schedule and report to AAS management team in case of any defects/problems
October 2002-April 2010: Azeri Mi-SWACO Company
Position: ES Senior Service - engineer. (ES- Environmental Solution). I've got experience in solids control job (shale shakers, shaker screens, centrifuges, deciliters, decanters, degasser, centrifugal pumps, feed pumps, mud cleaners ) , filtration job, CRI (cutting re-injection) systems, de-watering job, Duster Dryer, Verti-G, CCB (Clean Cut Cutting Blower ) systems, vacuum units, and drilling waste management systems, maintenance equipment, installation equipment. I was worked in Gulf of Mexico (USA), Nigeria, Georgia, Sakhalin Island (Russia), North Sea (Scotland), Kazakhstan, Azerbaijan offshore rigs and onshore rigs. I was work for BP, Shell, Fonterra, Sakhalin energy, Rossneft, Agip, Total ELF, SOCAR , EXXON, Lukoil, Karasu operating company, Gobustan operating company.
Responsibilities:
Assist with the operation and maintenance of ES field equipment. Gain understanding of equipment function, also troubleshooting of equipment and products, pass this information to customer and rig personnel. Advise supervisor of any new competitive developments, products, pricing, servicing procedures and technical application or of increasing customer interest. Monitor the effectiveness of the company's QHSE Management Procedures and ensure all legal and contractual requirements are fulfilled to the customer's satisfaction. Maintain an active role in the identification of Opportunities for improvement in the company's QHSE Management systems. Writing STOP cards, using TOFS system, attend all safety meetings, perform crew toolbox meetings. Work to vision of ZERO-ZERO-ZERO (Zero Accidents, Zero spills, Zero Fatalities). Familiarize and follow BP' s "Golden Rules of Safety".
Dewatering job:
Regular pilot testing of dewatering treatment to be pilot tested by Dewatering engineer in consultation with mud engineer to avoid excess polymer and flocculent in recovered water/ brine for mixing mud. Daily maintenance of that unit. Reported customer and project engineer recovered fluid volume and solids discarded to skips.
Cutting Containment System:
Regular inspection and testing of equipment as per operating guidelines.
Daily maintenance , recording all numbers of drill cutting boxes, total weights of cuttings and containment mud should be reported customer and office by daily reports. To observe all rules QHSE.
Solids Control Equipment: Daily inspection and maintenance solids control equipment, check discard, mud weight before centrifuges and after. Check the shale shakers, shaker screens, centrifuges, deciliters, decanters, degasser, centrifugal pumps, feed pumps, mud cleaners. All volumes and weights of mud and solids discharge recorded for centrifuge systems included in Daily Report.
Azerbaijan: I was working on Central Azeri, West Azeri, East Azeri, Shah Deniz, Chirag, Istiglal, Dada Gorgud platforms for BP. LIDER or Heydar Aliyev platform (Maersk company rig) for EXXON, JAOC, Lukoil. Onshore rigs - for SOCAR, Karasu operating company, Gobustan operating company.
Georgia for Fronterra: Sakhalin Island - for Rossneft and BP: Nigeria- for BP. Gulf of Mexico - for BP, Shell, EXXON: Kazakhstan- for AGIP.

May 2000- September2002:
Transocean Sedco Forex as SDP mechanic. SDP- Supervisor Development Programs.
Responsibilities: Repairing all rig equipment and daily maintenance. Experience working on Diesel engines ( Wartsila V12), CAT. Maintenance: Generators, Air Compressors, mud pumps, cranes, drawworks, agitators, BOP, Top drive, air taggers, sea water pumps, centrifugal pumps and etc.
I was working on Trident 20 which was built in Baku. Caspian Sea (Azerbaijan territory) for EXXON, Total ELF, JAOC.
Kazakhstan: for Agip.

December 1998-May 2000:
Worked in "Trust of Azeri Oil Field Geophysics" part of SOCAR Company. Position engineer - geophysics.
Responsibilities: Made all views of logging (gamma ray, neutron, electric and etc.) I was work in Azerbaijan.

June 1997-November 1998:
Schlumberger Company - as MWD engineer. MWD- Measurement While Drilling. Worked in Kazakhstan and Azerbaijan
Azerbaijan - for BP. Kazakhstan -for Agip and Government Company.

COMPUTER SKILLS:
Experienced with following computer applications: MS Windows 98, ME, 2000, XP, Vista. Word, Excel, Corel Draw, Auto Cad and etc.

LANGUAGES:
Native Language- Russian, fluent knowledge of English, can speak Azeri.

MULLITARY SERVICES:
Attended intensive "Nuclear and Chemical Defense" course during studying at "Azerbaijan State Oil Academy" and obtained rank of lieutenant reserve.

JOB INTEREST:
I would like to continue working in the oil industry, because it is my profession and subject which I studied in Azerbaijan State Oil Academy. I already have experience in foreign company.
OTHERS:
In my free time I like read the books, playing tennis, pool, basketball. I try to use every minute to improve my English. I have got driving license.